Connect with us

Tech

Components of Energy Management System

Published

on

Energy Management System

It is important for any commercial building to make smart energy decisions because it ultimately translates into their savings. This brings you to the two most recognizable capabilities and elements of energy management systems for commercial buildings– energy monitoring and control. Energy monitoring allows you to track your energy consumption at the device level. You can always buy standalone energy monitoring systems; they give you the additional benefit of energy control at the circuit level.

Have you wondered what makes these systems so capable of control and monitoring? To be capable of such efficiency and be considered a standalone building energy monitoring software, a few components must be incorporated. These include consumption monitors, smart panels, control apps, etc. The ultimate difference associated with these components is their location within the structure.

Consumption Monitors

Do you wish to keep track of your energy consumption regularly? You don’t need energy management software or a system to do so. Here is where the working of consumption monitors dwells. They are an integral segment of the overall energy management system. Consumption monitors can fit into many forms at different points and provide several layers of details.

In order to extract power from each drawn circuit, you need to connect it with smart panels at the circuit level. Additional monitoring devices can also be added to keep a track of the detailed data. These monitors use machine learning and artificial intelligence to gain knowledge about electricity signatures related to individual devices.

Smart Panels

Do you realize what the heart of an energy management system is? Innovative panels are the main component of the system that take two specific forms: one with replacing your current electrical panel or with the addition. When you need to upgrade your home’s electrical panel or probably install a solar panel, select a system that replaces your electrical panel. If you wish to reduce the overall cost and time of your management system installation, know your current electrical panel.

Smart Circuits

The control unit is differentiating between a standalone consumption monitor and an energy management system, and here innovative circuits take action. With these controllable circuits, you can remotely turn on and turn off circuits. Replacing your electrical panel with an intelligent discussion makes your circuit bright. But, if you wish to purchase an additional smart board, you can rewire your electrical panel. All you need to focus on is transforming your ordinary circuits to make them smart circuits.

However, one of these panels will not cover every circuit, so multiple add-on smart panel purchases need to be made to get control over every course. To control it on the device level, you can buy smart plugs to upgrade your electrical outlets and control them on your mobiles. Remember, depending on the energy management system, these may or may not be controllable with your app.

Meters

There are multiple meters with the same idea throughout. The overall functioning is operative through metering and submetering processes. The meter can be installed in the electrical box. It measures the energy management of the facility that is being consumed. Sub-metering is usually done in any energy management system. It is a more granular form of metering. And submetering is a process where the meter gathers information about particular plans stored in the facility to track the amount of energy being consumed by the source on its own.

Sensors

Wired and wireless sensors are positioned to monitor certain areas while recording specific data sections. Sensors are an efficient planning source for the components of energy management systems. Here are some of the sensors you usually find with energy management systems.

  • Space temperature sensors are placed in the room’s center to communicate back to the server and the thermostat about the area’s temperature.
  • Duct temperature sensors are typically placed in air supply channels and the return ducts to measure the temperature. It diagnoses problems with specific units and determines the temperature being pushed out.
  • Water heater sensors: these sensors are kept at the water heater to make sure the temperature is appropriately heated to acquire health code specs.
  • Remote temperature sensors: they are wireless sensors responsible for monitoring food and preparing areas or minute places to reach. They gather temperature data and report them to the cloud, ensuring the food is appropriately compliant.
  • Photocell sensors: these sensors play a vital role in interacting with lighting. Photocell sensors are positioned outdoors; they communicate to the server about the amount of light present on the outside.

Bottom Line

Understanding energy management systems or building software is not rocket science anymore. Each of these components explained above can be integrated into your system distinctively depending on the choice of your system or vice versa. Still, when combined collectively, it forms a full-fledged energy management system.

Tech

Top 3 Advanced Persistent Threats and How Businesses Can Stop their Attacks

Published

on

By

Businesses of various sizes and fields are susceptible to advanced persistent threats (APTs). According to the cybersecurity company ANY.RUN, in the first quarter of 2025 the most active phishing groups were Storm1747, TA569, and Storm1575. isn’t limited to, finance, media, and cybersecurity.

To protect the infrastructure of your organization, learn about their tactics and weak spots below.

Storm1747 – detected 16,140 times in January–March 2025

Storm1747 is a cybercriminal group responsible for the Tycoon 2FA phishing kit. It’s known to evade detection systems by using malicious QR codes. Still, such attacks don’t go unnoticed. The adversaries leave traces, and they can be identified.

To retrieve information on them and protect your company, use threat intelligence services. Here’s how to investigate threats in ANY.RUN’s TI Lookup, a constantly updated searchable database of IOCs, IOAs, and IOBs of the most recent attacks:

1.Enter the query

TI Lookup allows you to conduct compound searches. For example, let’s browse its database to look for threats flagged as Storm1747 and involving QR codes by entering this query:

threatName:”storm1747″ AND threatName:”qrcode”

threatName:"storm1747" AND threatName:"qrcode"

In TI Lookup, you can form compound searches with any of over 40 available parameters

Explore current cyber threats with 50 trial requests in TI Lookup

2.See the results

Now we can see a list of all freshly gathered threat samples that fit our requirements:

The list of threat samples that fit our query

The list of threat samples that fit our query

3.Collect actionable intel to enrich your defense

Each contains an in-depth threat context. By clicking any of the search results, you can continue the analysis in ANY.RUN’s Interactive Sandbox for malware analysis to collect detailed info on each threat and interact with malicious files safely to understand their behavior:

Interact with malware for further analysis in ANY.RUN’s Sandbox

Interact with malware for further analysis in ANY.RUN’s Sandbox

That’s how you can analyze recent attacks, collect their indicators, and take measures to protect your company from upcoming threats associated with them.

TA569 – detected 1,005 times in January–March 2025

TA569 is a threat actor responsible for the SocGholish malware injected into compromised websites via malicious JavaScript.

With this simple search query in TI Lookup, we can find our which domains fell victim to SocGholish:

threatName:”socgholish” AND domainName:””

Search results for domains associated with the SocGholish

Search results for domains associated with the SocGholish

You can also subscribe to this or any other query via the Search Updates feature to keep track of the threats as they evolve. In this case, information on fresh attacks will appear on your dashboard highlighted in green.

Search Updates in TI Lookup allow you to track evolving threats

Search Updates in TI Lookup allow you to track evolving threats

Storm1575 – detected 762 times in January–March 2025

TI Lookup allows you to check if an indicator has anything to do with a threat. For instance, you would like to find out whether a website is related to malicious activities. All you have to do is to browse the database for its mentions using a query like that:

domainName:”castirontexas[.]com”

And in a moment’s time, you’ll know that this website is associated with Storm1575, one of the leading recent cyber criminal groups. It’s known to conduct attacks targeting companies globally via the Dadsec platform.

The website we checked is associated with malicious activities

The website we checked is associated with malicious activities

Try TI Lookup to Enrich Alerts and Speed up Incident Response

TI Lookup’s searchable database provides you with the most up-to-date information on the latest cyber threats and enables business and organizations to:

  • Detect and identify attacks before they cause damage
  • Investigate and browse IOCs, IOAs, and IOBs for more insights on threat actors
  • Enhance the efficiency of your security team’s workflow
  • Gain access to data that helps take proactive action against cyber threats

Over 500,000 security professionals worldwide, including SOC teams from 15,000 companies, contribute to ANY.RUN’s database, keeping it relevant and abundant.

Continue Reading

Tech

How Accurate Pulley Alignment Can Prevent Equipment Failures

Published

on

By

Pulley Alignment

In industrial settings, the smooth operation of machinery is essential for productivity and safety. One often overlooked aspect that can significantly impact machinery performance is pulley alignment. Proper alignment of pulleys ensures that belts run smoothly, reducing wear and tear on equipment components and minimizing the risk of costly breakdowns. In this article, we’ll explore the importance of accurate pulley alignment and how it can prevent equipment failures.

Understanding Pulley Alignment

Pulleys are critical components in various types of machinery, including conveyor systems, pumps, and motors. They transmit power from one rotating shaft to another via belts or chains. When pulleys are misaligned, even slightly, it can lead to a range of problems, including increased friction, excessive vibration, and premature wear on belts and bearings.

Common Causes of Misalignment

Several factors can contribute to pulley misalignment, including:

  1. Installation Errors: Improper installation of pulleys or shafts can result in misalignment from the start.
  2. Belt Tension: Inadequate or uneven belt tension can cause pulleys to shift out of alignment over time.
  3. Shaft Deflection: Shaft deflection due to excessive loads or improper support can lead to misalignment issues.
  4. Thermal Expansion: Temperature fluctuations within the machinery can cause components to expand or contract, affecting pulley alignment.

Impact of Misalignment on Equipment

Misaligned pulleys can have significant consequences for machinery and production processes, including:

  • Increased Wear and Tear: Misalignment causes excessive friction, leading to accelerated wear on belts, bearings, and other components.
  • Reduced Efficiency: Machinery operates less efficiently when pulleys are misaligned, resulting in higher energy consumption and reduced productivity.
  • Vibration and Noise: Misalignment often results in excessive vibration and noise, which can be disruptive and potentially harmful to equipment and personnel.

Preventive Measures

Preventing pulley misalignment is key to maintaining equipment reliability and prolonging service life. Here are some preventive measures to consider:

  1. Regular Inspection: Conduct routine inspections of pulley alignment using precision tools such as a laser alignment tool. Identify and correct misalignment issues promptly.
  2. Proper Installation: Ensure that pulleys and shafts are installed correctly according to manufacturer guidelines to minimize the risk of misalignment from the outset.
  3. Belt Tensioning: Maintain proper belt tension to prevent slippage and minimize the likelihood of pulley misalignment.
  4. Temperature Monitoring: Monitor temperature fluctuations within the machinery and take measures to minimize thermal expansion effects on pulley alignment.

Importance of Laser Alignment Tools

Laser alignment tools are invaluable for achieving precise pulley alignment. These advanced devices use laser technology to measure and adjust the position of pulleys with unparalleled accuracy. By providing real-time feedback and visual guidance, laser alignment tools enable operators to achieve optimal alignment quickly and efficiently.

Conclusion

In conclusion, accurate pulley alignment is crucial for preventing equipment failures and ensuring the smooth operation of industrial machinery. By addressing misalignment issues proactively and utilizing advanced tools such as laser alignment tools, manufacturers can minimize downtime, reduce maintenance costs, and enhance overall productivity. Investing in proper pulley alignment practices is a wise decision that pays dividends in the form of improved equipment reliability and performance.

Remember, maintaining optimal pulley alignment is not just a matter of efficiency—it’s a fundamental aspect of ensuring the safety and longevity of industrial equipment.

Continue Reading

Business

Tweet Your Way Towards Better Dental Marketing Results

Published

on

By

Dental Marketing

As one of the leading social networking sites nowadays, Twitter is a good way to promote a business. Engagements and search results can be easily achieved. Through a 140-character content, you have the power to expand your business.

Retweets and Likes are mostly the forms of promotions that Twitter uses. But because Twitter uses a different method of curating the content, there is a possibility that new tweets will cover up the tweets, tweeted just minutes ago.

So, as proven time and again, Twitter is a great tool for promoting. But it isn’t a genie’s lamp that would grant you wishes for faster marketing success. Instead, it needs to have great content that is relevant to your audience.

How to use Twitter for your Dental Campaign

Social media is a great way to grow your practice with dental marketing ideas, especially if you’re looking for dental patients. Twitter in particular is a good platform to start with, as it allows you to connect and communicate with your audience in the most direct and effective way.

There are many benefits to using twitter for your dental marketing even if you are not a “techie” or a “geek”.

Here are some of them:

  • Twitter provides a fast and effective way to communicate with your target audience.
  • You can interact with people who might not know who you are yet. You can build relationships with potential clients.
  • Twitter can help you find new customers. Use hashtags to get known by new customers who might be looking for someone exactly like you.
  • Twitter helps you stay relevant and up-to-date on current trends and news affecting your industry. You can share important information regarding dental health, dentists, procedures and products with your followers.
  • Twitter gives you credibility as an expert by sharing your knowledge and experience with other dental practitioners, patients and potential clients.

Twitter might be a little bird that only allows 140 characters, but if you know how to maximize its use, then you’ll expect better results.

Here are some the tips on using Twitter for your marketing strategy:

Know How to Use the Search Option Properly

A lot of Twitter users don’t know how the search options work and how to properly use the search operators to  accurately get the results that they need.

Most people just randomly type keywords in the search box, but what they did not know is that Twitter will only search tweets that have all those words. The results usually show unrelated tweets, to what you intend to find.

However, to obtain better results, users should use the search operator or in between the two keywords that they are searching. And if they are using phrases to search something, it is better to use “” for better results.

From Pinned Tweet to Feature Box

Feature Box is like a lead magnet of your page that allows visitors to add to your email list – it is a form that is on the top of your homepage. You can turn your pinned tweet into a feature box by using lead generation cards and a pinned tweet.

You can create this by only making a Lead Generation Card that includes rewards for people who use or answer the form then pin the tweet to your Twitter profile, then there you have it!

This tool will come in handy in the future when you use it with other marketing tools, and you can directly download your email list with this also.

Tweet the Same Content Many Times but Tweak it a Little

The downside that Twitter has a lot of users is that recent tweets immediately are covered by other tweets. And it results in previous tweets being neglected and becomes useless.

What you can do to maximize the tweeting process to promote this is to tweet the same content a lot of times. Don’t be afraid to do it, because sometimes your second tweet will work better than your first one.

However, even if it is a good idea to tweet the same tweet a couple of times, making the text and image different each time you tweet has a higher risk of receiving tons of interest and engagement. With this also, you can check the analytics of the type of tweets and contents works well.

Your Tweets Should Look Good

Links can be a great help for contents but having long tweets can limit the character count of your tweet. Instead of tweeting the whole link, you can maximize link shorteners. With this, it also makes your tweets neater.

Your Tweets Should Look Good

As Twitter keeps on changing, adding videos and images can make a great difference as well because they make your tweets more attractive instead of having dull tweets. Engagements are usually high with this kind of tweets.

Your displayed photo and header should match the business that you have. Make sure that the pictures that you are going to use have high resolutions and fits with the standard sizes that twitter has.

Even your profile bio should be presentable as it is the first thing after your picture that a visitor will look at. Make it short and exciting, like phrases that describe your business or page.

Create a Proper Tweeting Schedule

It may sound so vain, but there are appropriate hours where the engagement is higher compared to other hours of the day. You should properly study the perfect timing, and make scheduled tweets to increase awareness and engagement for your tweets. This way, a lot will be aware of your business.

Takeaway

As social media marketers, using influencer marketing enables us to learn new strategies about social media and how to connect and achieve more engagements. Knowing Twitter’s basics and setting up a profile can help you understand the advances.

Continue Reading

Trending